The 90% rule:<\/strong> If your door was installed after 2000 in Romania, the axis distance is almost certainly 72 mm. Still, check with a ruler before ordering.<\/div>\n
The handle spindle length<\/h2>\n
The spindle passes through the door and connects the front handle to the back one. Its length must match the thickness of your door.<\/p>\n\n\n\n\n\n\n\n\n\n
Door thickness<\/th>\n Spindle length needed<\/th>\n Door type<\/th>\n<\/tr>\n<\/thead>\n
35-40mm<\/td>\n 70-75mm<\/td>\n Budget standard interior doors<\/td>\n<\/tr>\n
40-45mm<\/td>\n 75-80mm<\/td>\n Standard interior doors in Romania<\/td>\n<\/tr>\n
45-50mm<\/td>\n 80-85mm<\/td>\n Premium interior doors, solid wood<\/td>\n<\/tr>\n
50-60mm<\/td>\n 85-95mm<\/td>\n Simple insulated exterior doors<\/td>\n<\/tr>\n
70-100mm<\/td>\n 110-130mm<\/td>\n Armoured, secured doors<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
Enger handles ship with a standard spindle of 80mm<\/strong>, suitable for doors 40-45 mm thick. For thicker doors, order the spindle separately in the right length.<\/p>\n
Rose dimensions<\/h2>\n
A rose has several relevant dimensions: outer diameter 52-55 mm on standard round roses; 52\u00d752 mm on square roses; cylinder hole diameter 28-30 mm (compatible with standard European cylinders); profile thickness 5 mm or 7 mm (SLIM) or 12-15 mm (classic); handle spindle hole 8 mm standard (square).<\/p>\n
Important when replacing:<\/strong> If you replace a classic rose with a SLIM one of the same outer diameter, the swap is straightforward. If you switch to a smaller diameter, visible marks can remain on the door.<\/div>\n
Door thickness and cylinder length<\/h2>\n
The locking cylinder must be proportioned to the thickness of the door. Too short and it will not fix properly; too long and it protrudes from the rose, vulnerable to snap attacks.<\/p>\n\n\n\n\n\n\n\n\n
Door thickness<\/th>\n Recommended cylinder<\/th>\n Format<\/th>\n<\/tr>\n<\/thead>\n
40mm<\/td>\n 30+10mm<\/td>\n 40 mm cylinder in total<\/td>\n<\/tr>\n
45mm<\/td>\n 30+15mm<\/td>\n 45 mm cylinder in total<\/td>\n<\/tr>\n
55mm<\/td>\n 30+25mm<\/td>\n 55 mm cylinder in total<\/td>\n<\/tr>\n
65mm<\/td>\n 30+35mm<\/td>\n 65 mm cylinder in total<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
Safety rule:<\/strong> the cylinder should not protrude more than 3 mm past the surface of the rose. A protruding cylinder can be wrenched off with an adjustable spanner (snap attack).<\/p>\n
Lock dimensions<\/h2>\n
The door lock (the internal mechanism) must be compatible with the handle. Key parameters: backset 60 mm or 70 mm \u2014 the distance from the door edge to the centre of the handle spindle; faceplate height 235 mm European standard; spindle square 8 mm standard; latch travel 13 mm or 18 mm.<\/p>\n
How to measure correctly \u2014 step by step<\/h2>\n
(1) Measure the PZ axis distance \u2014 from the centre of the cylinder hole to the centre of the handle spindle hole. Use a metal ruler. Typical result: 72 mm. (2) Measure the door thickness \u2014 with the door open, measure the full panel thickness. Add 5 mm to determine the spindle length needed. (3) Check the lock backset \u2014 from the edge of the door to the centre of the handle spindle. 60 mm or 70 mm are the standard values. (4) Photograph the current cylinder \u2014 if replacing a cylinder, photograph it with a ruler next to it. The length and format must stay identical. (5) Not sure? Send us photos and measurements and we will help you identify compatible products \u2014 free of charge.<\/p>\n
\n
Need help with the dimensions?<\/h3>\n
The LC Design team helps you choose the right handle for your door \u2014 free, with no obligation.<\/p>\n
See the Enger collection<\/a> | Free advice<\/a><\/div>\n
\n
Handles compatible with your door<\/h3>\n
\n
Enger handles<\/strong>
PZ 72 mm standard, 80 mm spindle included<\/a><\/div>\n
Aprile SLIM handles<\/strong>
5 mm and 7 mm roses<\/a><\/div>\n
Check compatibility<\/strong>
Send us your dimensions<\/a><\/div>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"
Ce dimensiuni standard au m\u00e2nerele de u\u0219i? Distan\u021ba axelor, lungimea clichetului, dimensiunea rozetei \u2014 tot ce trebuie s\u0103 \u0219tii \u00eenainte s\u0103 comanzi.<\/p>","protected":false},"author":8,"featured_media":19334,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"_eb_attr":"","site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"default","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"categories":[339],"tags":[],"class_list":["post-20862","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-informatii-utile"],"acf":[],"aioseo_notices":[],"aioseo_head":"\n\t\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t

Door thickness<\/th>\n	Recommended spindle length<\/th>\n<\/tr>\n<\/thead>\n
35\u201345 mm (standard HDF doors)<\/td>\n	65 mm or 70 mm<\/td>\n<\/tr>\n
45\u201355 mm (semi-solid doors)<\/td>\n	75 mm or 80 mm<\/td>\n<\/tr>\n
55\u201370 mm (solid wood doors)<\/td>\n	85 mm or 90 mm<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n 3. The locking type \u2014 BB, WC or OA<\/h2>\n \n BB (Bedroom)<\/strong> \u2014 handle without locking. For bedrooms, living rooms, offices.<\/li>\n WC (Bathroom)<\/strong> \u2014 locks from the inside with emergency release. A must for bathrooms.<\/li>\n OA (with key)<\/strong> \u2014 locks with a key from the outside.<\/li>\n<\/ul>\n 4. SLIM rose thickness \u2014 5 mm or 7 mm<\/h2>\n It depends on the groove machined into the door. Read the full guide on roses<\/a> SLIM<\/a><\/p>\n Summary \u2014 what to measure before ordering<\/h2>\n \n Axis distance (standard: 72 mm)<\/li>\n Door thickness \u2192 spindle length<\/li>\n The locking type needed (BB\/WC\/OA)<\/li>\n Groove depth \u2192 rose thickness (5 mm or 7 mm)<\/li>\n<\/ol>\n Find compatible handles<\/a><\/p>\n Why dimensions matter<\/strong> The most common reason a door handle cannot be fitted is a wrong dimension: the axis distance, spindle length or rose diameter does not match the door. This guide explains all the measurements so you buy right.<\/div>\n The axis distance (PZ) \u2014 the most important dimension<\/h2>\n The axis distance (PZ \u2014 from the German Profilzylinder-Abstand) is the distance between the centre of the locking cylinder and the centre of the handle spindle. It determines whether the handle fits the lock in your door.<\/p>\n\n\n\n\n\n\n\n Standard<\/th>\n Axis distance<\/th>\n Use<\/th>\n<\/tr>\n<\/thead>\n European standard<\/strong><\/td>\n 72 mm<\/strong><\/td>\n The most common in Romania, interior and exterior doors<\/td>\n<\/tr>\n Small standard<\/td>\n 62 mm<\/td>\n Older doors, some bathroom doors<\/td>\n<\/tr>\n Large standard<\/td>\n 92 mm<\/td>\n Armoured exterior doors, industrial doors<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n The 90% rule:<\/strong> If your door was installed after 2000 in Romania, the axis distance is almost certainly 72 mm. Still, check with a ruler before ordering.<\/div>\n The handle spindle length<\/h2>\n The spindle passes through the door and connects the front handle to the back one. Its length must match the thickness of your door.<\/p>\n\n\n\n\n\n\n\n\n\n Door thickness<\/th>\n Spindle length needed<\/th>\n Door type<\/th>\n<\/tr>\n<\/thead>\n 35-40mm<\/td>\n 70-75mm<\/td>\n Budget standard interior doors<\/td>\n<\/tr>\n 40-45mm<\/td>\n 75-80mm<\/td>\n Standard interior doors in Romania<\/td>\n<\/tr>\n 45-50mm<\/td>\n 80-85mm<\/td>\n Premium interior doors, solid wood<\/td>\n<\/tr>\n 50-60mm<\/td>\n 85-95mm<\/td>\n Simple insulated exterior doors<\/td>\n<\/tr>\n 70-100mm<\/td>\n 110-130mm<\/td>\n Armoured, secured doors<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n Enger handles ship with a standard spindle of 80mm<\/strong>, suitable for doors 40-45 mm thick. For thicker doors, order the spindle separately in the right length.<\/p>\n Rose dimensions<\/h2>\n A rose has several relevant dimensions: outer diameter 52-55 mm on standard round roses; 52\u00d752 mm on square roses; cylinder hole diameter 28-30 mm (compatible with standard European cylinders); profile thickness 5 mm or 7 mm (SLIM) or 12-15 mm (classic); handle spindle hole 8 mm standard (square).<\/p>\n Important when replacing:<\/strong> If you replace a classic rose with a SLIM one of the same outer diameter, the swap is straightforward. If you switch to a smaller diameter, visible marks can remain on the door.<\/div>\n Door thickness and cylinder length<\/h2>\n The locking cylinder must be proportioned to the thickness of the door. Too short and it will not fix properly; too long and it protrudes from the rose, vulnerable to snap attacks.<\/p>\n\n\n\n\n\n\n\n\n Door thickness<\/th>\n Recommended cylinder<\/th>\n Format<\/th>\n<\/tr>\n<\/thead>\n 40mm<\/td>\n 30+10mm<\/td>\n 40 mm cylinder in total<\/td>\n<\/tr>\n 45mm<\/td>\n 30+15mm<\/td>\n 45 mm cylinder in total<\/td>\n<\/tr>\n 55mm<\/td>\n 30+25mm<\/td>\n 55 mm cylinder in total<\/td>\n<\/tr>\n 65mm<\/td>\n 30+35mm<\/td>\n 65 mm cylinder in total<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n Safety rule:<\/strong> the cylinder should not protrude more than 3 mm past the surface of the rose. A protruding cylinder can be wrenched off with an adjustable spanner (snap attack).<\/p>\n Lock dimensions<\/h2>\n The door lock (the internal mechanism) must be compatible with the handle. Key parameters: backset 60 mm or 70 mm \u2014 the distance from the door edge to the centre of the handle spindle; faceplate height 235 mm European standard; spindle square 8 mm standard; latch travel 13 mm or 18 mm.<\/p>\n How to measure correctly \u2014 step by step<\/h2>\n (1) Measure the PZ axis distance \u2014 from the centre of the cylinder hole to the centre of the handle spindle hole. Use a metal ruler. Typical result: 72 mm. (2) Measure the door thickness \u2014 with the door open, measure the full panel thickness. Add 5 mm to determine the spindle length needed. (3) Check the lock backset \u2014 from the edge of the door to the centre of the handle spindle. 60 mm or 70 mm are the standard values. (4) Photograph the current cylinder \u2014 if replacing a cylinder, photograph it with a ruler next to it. The length and format must stay identical. (5) Not sure? Send us photos and measurements and we will help you identify compatible products \u2014 free of charge.<\/p>\n \n Need help with the dimensions?<\/h3>\n The LC Design team helps you choose the right handle for your door \u2014 free, with no obligation.<\/p>\n See the Enger collection<\/a> \| Free advice<\/a><\/div>\n \n Handles compatible with your door<\/h3>\n \n Enger handles<\/strong> PZ 72 mm standard, 80 mm spindle included<\/a><\/div>\n Aprile SLIM handles<\/strong> 5 mm and 7 mm roses<\/a><\/div>\n Check compatibility<\/strong> Send us your dimensions<\/a><\/div>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":" Ce dimensiuni standard au m\u00e2nerele de u\u0219i? Distan\u021ba axelor, lungimea clichetului, dimensiunea rozetei \u2014 tot ce trebuie s\u0103 \u0219tii \u00eenainte s\u0103 comanzi.<\/p>","protected":false},"author":8,"featured_media":19334,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"_eb_attr":"","site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"default","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"categories":[339],"tags":[],"class_list":["post-20862","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-informatii-utile"],"acf":[],"aioseo_notices":[],"aioseo_head":"\n\t\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t

4. SLIM rose thickness \u2014 5 mm or 7 mm<\/h2>\nIt depends on the groove machined into the door. Read the full guide on roses<\/a> SLIM<\/a><\/p>\n

Summary \u2014 what to measure before ordering<\/h2>\n\nAxis distance (standard: 72 mm)<\/li>\nDoor thickness \u2192 spindle length<\/li>\nThe locking type needed (BB\/WC\/OA)<\/li>\n

4. SLIM rose thickness \u2014 5 mm or 7 mm<\/h2>\n
It depends on the groove machined into the door. Read the full guide on roses<\/a> SLIM<\/a><\/p>\n